E6890A Datasheet, PDF (3/6 Pages) Agilent(Hewlett-Packard) – Wireless Communications Test Set

RF Analyzer
Frequency ranges
Cellular bands
General purpose
Input level ranges
Average power
Peak power
Self alignment validity
VSWR
RF IN/OUT
400 to 1000 MHz
1000 to 2000 MHz
2000 to 2200 MHz
2200 to 2600 MHz
Filters
Trigger setup
Arm
Delay (varies by filter
and measurement)
Sources
(varies by measurement)
Measurement setup
Averaging
(multi-measurement
count–not applicable to
all measurements)
Timeout
411 to 486 MHz
776 to 960 MHz
1574 to 1577 MHz
1710 to 1980 MHz
400 to 2000 MHz
–65 to +33 dBm, typical
over-range to +35 dBm
–65 to +37 dBm (5 W)
≤ ±10 °C change and ≤ 30 days
from last self alignment
< 1.15:1
< 1.2:1
< 1.3:1
< 1.35:1
1 kHz
30 kHz
100 kHz
300 kHz
640 kHz
1.23 MHz
1.6 MHz
3.84 MHz
5.0 MHz
GSM Tx power
W-CDMA mean power
Single, continuous
–180 to 180 ms
External, fall, immediate, rise
Off, 1 to 999
Off, 0.1 to 999.9 s
RF Channel Suite
Includes channel power, frequency error, power versus time, and
IQ capture measurements.
Input level range
Average power
–65 to +35 dBm
Measurement interval and filter ranges
1 kHz filter
1 to 5000 ms
30 kHz filter
0.4 to 4000 ms
100 kHz filter
0.1 to 4000 ms
300 kHz filter
0.01 to 1700 ms
640 kHz filter
0.01 to 810 ms
1.23 MHz filter
0.01 to 420 ms
1.6 MHz filter
0.01 to 320 ms
3.84 MHz filter
0.01 to 135 ms
5.0 MHz filter
0.01 to 100 ms
GSM Tx power filter
0.01 to 199 ms
W-CDMA mean power filter 0.1 to 3200 ms
Channel power measurement
Measurement accuracy¹
Within cellular frequency bands
–59 to +35 dBm
< ±0.6 dB, typically < ±0.3 dB
–65 to < –59 dBm
< ±0.7 dB, typically < ±0.4 dB
Within cellular frequency bands with < 48 hours warm-up before
self alignment initiated
–59 to +35 dBm
< ±0.7 dB, typically < ±0.3 dB
–65 to < –59 dBm
< ±0.8 dB, typically < ±0.4 dB
400 to 2000 MHz
–59 to +35 dBm
–65 to < –59 dBm
Typically < ±0.4 dB
Typically < ±0.6 dB
Measurement repeatability Typically < ±0.05 dB
Returning to same level and frequency, no temperature change
and insignificant time change
Frequency error measurement
Measurement accuracy
CW signals from 400 to 2000 MHz
–60 to +35 dBm
with 1, 30, 100,
300, 640 kHz GSM
Tx power filters
< ±(50 Hz + timebase accuracy)
–40 to +35 dBm
with 1.23, 3.84,
5.0 MHz W-CDMA
mean power filters
< ±(50 Hz + timebase accuracy)
1. Additional accuracy error when using RF OUT ONLY port is < ±0.1 dB.
3