HCPL-315J Datasheet, PDF (2/21 Pages) Agilent(Hewlett-Packard) – 0.5 Amp Output Current IGBT Gate Drive Optocoupler

2
Selection Guide: Invertor Gate Drive Optoisolators
Package Type
8-Pin DIP (300 mil)
Part Number HCPL-3150 HCPL-3120 HCPL-J312 HCPL-J314
Number of
1
1
1
1
Channels
IEC/EN/DIN EN
60747-5-2
Approvals
V_IORM
630 V_peak
Option 060
V_IORM
891V_peak
UL
Approval
3750
Vrms/1 min.
3750
Vrms/1 min.
Output Peak
0.5A
2A
Current
2A
0.4A
CMR
(minimum)
15 kV/µs
10 kV/µs
UVLO
Yes
No
Fault Status
No
Widebody
(400 mil)
HCNW-3120
1
V_IORM
1414 V_peak
5000
Vrms/1min.
2A
Small Outline SO-16
HCPL-315J HCPL-316J HCPL-314J
2
1
2
0.5A
V_IORM
891 V_peak
3750
Vrms/1 min.
2A
0.4A
15 kV/µs
10 kV/µs
Yes
No
Yes
No
Ordering Information
Specify Part Number followed by Option Number (if desired)
Example
HCPL-315Y#XXXX
No Option = Standard DIP package, 50 per tube.
060 = IEC/EN/DIN EN 60747-5-2 V_IORM = 630 Vpeak Option, 50 per tube.
(HCPL-3150 only)
300 = Gull Wing Surface Mount Option, 50 per tube. (HCPL-3150 only)
500 = Tape and Reel Packaging Option. HCPL-3150; 1000 per reel.
HCPL-315J; 850 per reel.
XXXE = Lead Free Option
∅ = Single Channel, 8-pin PDIP.
J = Dual Channel, SO16.
Option data sheets available. Contact Agilent sales representative or authorized distributor.
Remarks: The notation “#” is used for existing products, while (new) products launched since 15th July 2001 and lead free option will use “–”
Package Outline Drawings
Standard DIP Package
9.40 (0.370)
9.90 (0.390)
87
6
A 3150 Z
YYWW
PIN ONE 1
2
3
1.19 (0.047) MAX.
5
OPTION CODE*
DATE CODE
6.10 (0.240)
6.60 (0.260)
7.36 (0.290)
7.88 (0.310)
4
1.78 (0.070) MAX.
0.20 (0.008)
0.33 (0.013)
5° TYP.
3.56 ± 0.13
(0.140 ± 0.005)
PIN ONE
0.76 (0.030)
1.40 (0.055)
4.70 (0.185) MAX.
0.51 (0.020) MIN.
2.92 (0.115) MIN.
0.65 (0.025) MAX.
2.28 (0.090)
2.80 (0.110)
DIMENSIONS PININMDILIALIGMREATMERS AND (INCHES).
* MARKING1 COVD_DE_D1LETVT_DE_DR₂FO8R OPTION NUMBERS.
"V" = OPTION 060.
OPTION NU2MBVE_INR₊S 3V00_OUA_TN₊D 5700 NOT MARKED.
NOTE: FLO3ATVIN_ING_–LEVA_OD_UP_TR_–OT6RUSION IS 0.25 mm (10 mils) MAX.
4 GND1 GND2 5