HCPL-5120 Datasheet, PDF (1/16 Pages) Agilent(Hewlett-Packard) – 2.0 Amp Output Current IGBT Gate Drive Optocoupler

Agilent HCPL-5120 & HCPL-5121
DSCC SMD 5962-04204
2.0 Amp Output Current IGBT
Gate Drive Optocoupler
Data Sheet
Description
The HCPL- 5120 contains a
GaAsP LED optically coupled to
an integrated circuit with a
power output stage. The device
is ideally suited for driving
power IGBTs and MOSFETs
used in motor control inverter
applications. The high
operating voltage range of the
output stage provides the drive
voltages required by gate
controlled devices. The voltage
and current supplied by this
optocoupler makes it ideally
suited for directly driving IGBTs
with ratings up to 1200 V/100
A. For IGBTs with higher
ratings, the HCPL- 5120 can be
used to drive a discrete power
stage, which drives the IGBT
gate.
The products are capable of
operation and storage over the
full military temperature range
and can be purchased as either
commercial products, with full
MIL- PRF- 38534 Class H testing,
or from Defense Supply Center
Columbus (DSCC) Standard
Microcircuit Drawing (SMD)
5962- 04204. All devices are
manufactured and tested on a
MIL- PRF- 38534 certified line
and are included in the DSCC
Qualified Manufacturers List,
QML- 38534 for Hybrid
Microcircuits.
Schematic Diagram
N/C 1
ANODE 2
CATHODE 3
N/C 4
SHIELD
8 V_CC
7 V_O
6 V_O
5 V_EE
Applications
• Industrial and Military
Environments
• High Reliability Systems
• Harsh Industrial Environments
• Transportation, Medical, and Life
Critical Systems
• Uninterruptible Power Supplies
(UPS)
• Isolated IGBT/MOSFET Gate Drive
• AC and Brushless DC Motor Drives
• Industrial Inverters
• Switch Mode Power Supplies
(SMPS)
Features
• Performance Guaranteed over Full
Military Temperature Range:
-55°C to +125°C
• Manufactured and Tested on a MIL-
PRF-38534 Certified Line
• Hermetically Sealed Packages
• Dual Marked with Device Part
Number and DSCC Drawing
Number
• QML-38534
• HCPL-3120 Function Compatibility
• 2.0 A Minimum Peak Output Current
• 0.5V Maximum Low Level Output
Voltage (V_OL) Eliminates Need for
Negative Gate Drive
• 10 kV/µs Minimum Common Mode
Rejection (CMR) at V_CM = 1000V
• I_CC = 5 mA Maximum Supply
Current
• Under Voltage Lock-Out Protection
(UVLO) with Hysteresis
• Wide Operating V_CC Range: 15 to 30
Volts
• 500 ns Maximum Propagation Delay
• ± 0.35µs Maximun Delay Between
Devices
CAUTION: It is advised that normal static precautions be taken in handling and assembly of
this component to prevent damage and/or degradation which may be induced by ESD.