HMC484MS8G_10 Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – GaAs MMIC 10 WATT T/R SWITCH DC - 3 GHz

HMC484MS8G / 484MS8GE
v04.0608
UED _{Evaluation Circuit Board}
GaAs MMIC 10 WATT T/R SWITCH
DC - 3 GHz
DISCPORONTDIUNCT _{Not Recommended for New} ^Designs
11
List of Materials for Evaluation PCB 104124 ^[1]
Item
J1 - J3
J4 - J7
C1 - C3
C4
R1 - R3
U1
Description
PCB Mount SMA RF Connector
DC Pin
100 pF capacitor, 0402 Pkg.
10 KpF capacitor, 0603 Pkg.
100 Ohm Resistor, 0402 Pkg.
HMC484MS8G / HMC484MS8GE
T/R Switch
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 Ohm impedance and the package ground leads
and package bottom should be connected directly
to the ground plane similar to that shown above. The
evaluation circuit board shown above is available
from Hittite Microwave Corporation upon request.
PCB ^[2]
104122 PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
11 - 8