HMC463LP5_11 Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – GaAs pHEMT MMIC LOW NOISE AGC AMPLIFIER, 2 - 20 GHz

v08.0511
Evaluation PCB
HMC463LP5 / 463LP5E
GaAs pHEMT MMIC LOW NOISE
AGC AMPLIFIER, 2 - 20 GHz
7
List of Materials for Evaluation PCB 108341 ^[1]
Item
Description
J1 - J2
SRI K Connector
J3 - J4
2 mm Molex Header
C1 - C3
100 pF Capacitor, 0402 Pkg.
C4 - C6
1000 pF Capacitor, 0603 Pkg.
C7 - C8
4.7 µF Capacitor, Tantalum
U1
PCB ^[2]
HMC463LP5(E) Amplifier
109949 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and package bottom should be
connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
7-8