HMC463LP5_11 Datasheet, PDF (6/8 Pages) Hittite Microwave Corporation – GaAs pHEMT MMIC LOW NOISE AGC AMPLIFIER, 2 - 20 GHz

v08.0511
HMC463LP5 / 463LP5E
GaAs pHEMT MMIC LOW NOISE
AGC AMPLIFIER, 2 - 20 GHz
Pin Descriptions
Pin Number
Function
1, 3, 4, 6-14,
16-20, 22-29,
N/C
31, 32
Description
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
Interface Schematic
7
Optional gate control if AGC is required.
2
Vgg2
Leave Vgg2 open circuited if AGC is not required.
Typical Vgg2 = -1.5V to 0V
5
RFIN
This pad is AC coupled and matched to 50 Ohms
15
Vgg1
Gate control for amplifier. Adjust to achieve Idd = 60 mA.
21
30
Ground
Paddle
RFOUT
Vdd
GND
This pad is AC coupled and matched to 50 Ohms
Power supply voltage for the amplifier.
External bypass capacitors are required
Ground paddle must be connected to RF/DC ground.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
7-6