HMC465LP5 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC MODULATOR DRIVER AMPLIFIER, DC - 20.0 GHz

v00.0404
HMC465LP5
MICROWAVE CORPORATION
GaAs PHEMT MMIC MODULATOR DRIVER
AMPLIFIER, DC - 20.0 GHz
8
Evaluation PCB
List of Materials for Evaluation PCB 108347 *
Item
J1 - J2
J3 - J4
C1, C2
C3 - C6
C7 - C9
U1
Description
SRI K Connector
2mm Molex Header
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
4.7 µF Capacitor, Tantalum
HMC465LP5
The circuit board used in the final application should use
RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads and
package bottom should be connected directly to the
ground plane similar to that shown. A sufficient number of
VIA holes should be used to connect the top and bottom
ground planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
PCB**
108345 Evaluation PCB
** Circuit Board Material: Rogers 4350
* Reference this number when ordering complete evaluation PCB.
8 - 280
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com