HMC465LP5 Datasheet, PDF (5/8 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC MODULATOR DRIVER AMPLIFIER, DC - 20.0 GHz

v00.0404
HMC465LP5
MICROWAVE CORPORATION
GaAs PHEMT MMIC MODULATOR DRIVER
AMPLIFIER, DC - 20.0 GHz
8
Pad Descriptions
Pad Number
1, 3, 4, 6-12,
14, 17, 18,
20, 22-28,
31, 32
Function
N/C
Description
No connection. These pins may be connected to RF
ground. Performance will not be affected.
Interface Schematic
2
Vgg2
Gate Control 2 for amplifier. +1.5V should be applied to
Vgg2 for nominal operation.
5
RFIN
This pad is DC coupled and matched to 50 Ohms
from DC - 20.0 GHz.
13
Vgg1
Gate Control 1 for amplifier.
15
16
21
29
30
Ground
Paddle
ACG4
ACG3
RFOUT & Vdd
ACG2
ACG1
Low frequency termination. Attach bypass capacitor
per application circuit herein.
RF output for amplifier. Connect the DC
bias (Vdd) network to provide drain current (Idd).
See application circuit herein.
Low frequency termination. Attach bypass capacitor
per application circuit herein.
GND
Ground paddle must be connected to RF/DC ground.
8 - 278
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com