HMC413QS16G_09 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – GaAs InGaP HBT MMIC POWER AMPLIFIER, 1.6 - 2.2 GHz

Evaluation PCB
v04.0505
HMC413QS16G / 413QS16GE
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 1.6 - 2.2 GHz
11
* For 5V operation on Vctl line,
select R1, R2 such that 3.6V is
presented on Pins 3 and 14.
List of Materials for Evaluation PCB 105000 ^[1]
Item
J1 - J2
J3
C1
C2
C3 - C4
C5
L1
U1
Description
PCB Mount SMA RF Connector
2 mm DC Header
2.2 pF Capacitor, 0603 Pkg.
10 pF Capacitor, 0402 Pkg.
330 pF Capacitor, 0603 Pkg.
2.2 μF Capacitor, Tantalum
16 nH Inductor 0603 Pkg.
HMC413QS16G / HMC413QS16GE
Amplifier
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
PCB ^[2]
105018 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
11 - 56
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com