HMC619LP5 Datasheet, PDF (6/8 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC POWER AMPLIFIER, DC - 10 GHz

v07.0908
HMC619LP5 / 619LP5E
GaAs PHEMT MMIC
POWER AMPLIFIER, DC - 10 GHz
Pin Descriptions
Pin Number
1, 3, 4, 6-12,
14, 17, 18, 19,
20, 22-28,
31, 32
Function
N/C
2
Vgg2
Description
No connection. These pins may be connected to RF
ground. Performance will not be affected.
Gate Control 2 for amplifier. +5V should be applied to
Vgg2 for nominal operation.
5
RFIN
This pad is DC coupled
and matched to 50 Ohms.
Interface Schematic
6
13
Vgg1
Gate Control 1 for amplifier.
15
16
21
29
30
Ground
Paddle
ACG4
ACG3
Low frequency termination. Attach bypass capacitor
per application circuit herein.
RFOUT & Vdd
ACG2
ACG1
RF output for amplifier. Connect the DC
bias (Vdd) network to provide drain current (Idd).
See application circuit herein.
Low frequency termination. Attach bypass capacitor
per application circuit herein.
GND
Ground paddle must be connected to RF/DC ground.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
6 - 329