HMC601LP4 Datasheet, PDF (6/8 Pages) Hittite Microwave Corporation – 75 dB, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER 10 - 4000 MHz

HMC601LP4 / 601LP4E
v01.0509
75 dB, FAST SETTLING, LOGARITHMIC
DETECTOR / CONTROLLER 10 - 4000 MHz
Package Information
Part Number
Package Body Material
HMC601LP4
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC601LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H601
XXXX
H601
XXXX
Pin Descriptions
Pin Number
Function
1, 6, 7-13,
15, 18-24
N/C
Description
These pins are not connected internally; however,
this product is specified with these pins connected
to RF/DC ground.
Interface Schematic
12
2, 5
Vcc1, Vcc2
Bias supply. Connect supply voltage to both pins.
3, 4
INP, INN
RF Input pins. Connect RF to INP, and AC couple
INN to ground for single-ended operation.
Apply PWD >0.8xVcc to initiate a
power saving shutdown mode.
14
PWD
To ensure proper start-up apply the power-up sequence
shown in the “Power-Up Timing Diagram” attached to the
application circuit.
16
VSET
VSET input in controller mode. Short this
pin to LOGOUT for detector mode.
17
Package
Base
LOGOUT
GND
Logarithmic output that converts the input power
to a DC level in detector mode. Short this pin to
VSET for detector mode.
Exposed paddle must be connected to RF and DC ground.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
12 - 15