HMC601LP4 Datasheet, PDF (5/8 Pages) Hittite Microwave Corporation – 75 dB, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER 10 - 4000 MHz

12
HMC601LP4 / 601LP4E
v01.0509
75 dB, FAST SETTLING, LOGARITHMIC
DETECTOR / CONTROLLER 10 - 4000 MHz
Input Return Loss vs. Frequency
0
-5
-10
-15
-20
-25
+25 C
+85 C
-30
-40 C
-35
0
1
2
3
4
5
FREQUENCY (GHz)
Absolute Maximum Ratings
Vcc1, Vcc2
PWD
VSET Input Voltage
LOGOUT Output Current
RF Input Power
Junction Temperature
Continuous Pdiss (T = 85°C)
(Derate 7.95 mW/°C above 85°C)
Thermal Resistance (R_th)
(junction to lead)
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
0V to +5.5V
0V to +5.5V
0V to +5.5V
3 mA
+12 dBm
125 °C
0.32 Watts
126 °C/W
-65 to +150 °C
-40 to +85 °C
Class 1C
Outline Drawing
LOGOUT Voltage
vs. Input Power & Frequency, T_A = +25C
2.4
50 MHz
900 MHz
1.9
1900 MHz
3500 MHz
4000 MHz
1.4
0.9
0.4
-70 -60 -50 -40 -30 -20 -10 0 10
INPUT POWER (dBm)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
[1] Unless otherwise noted: Vcc1, Vcc2 = +3.3V, TA = +25C
[2] This data is relative to the room temperature
performance of the HMC601LP4
12 - 14
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com