HMC464LP5_09 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC POWER AMPLIFIER, 2 - 20 GHz

v03.0308
Evaluation PCB
HMC464LP5 / 464LP5E
GaAs PHEMT MMIC
POWER AMPLIFIER, 2 - 20 GHz
11
List of Materials for Evaluation PCB 108344 ^[1]
Item
Description
J1, J2
PCB Mount SMA Connector
J3, J4
2 mm Molex Header
C1, C2
100 pF Capacitor, 0402 Pkg.
C3, C4
1000 pF Capacitor, 0603 Pkg.
C5, C6
4.7 μF Capacitor, Tantalum
U1
HMC464LP5 / HMC464LP5E
PCB ^[2]
109762 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
11 - 263