HMC462LP5_10 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 2 - 20 GHz

Evaluation PCB
HMC462LP5 / 462LP5E
v04.1010
GaAs pHEMT MMIC
LOW NOISE AMPLIFIER, 2 - 20 GHz
7
List of Materials for Evaluation PCB 108338 ^[1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
2 mm Molex Header
C1
100 pF Capacitor, 0402 Pkg.
C2
1000 pF Capacitor, 0603 Pkg.
C3
4.7 µF Capacitor, Tantalum
U1
PCB ^[2]
HMC462LP5 / HMC462LP5E
109751 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and package bottom should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
7-6