HMC620_09 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – GaAs MMIC I/Q MIXER 3 - 7 GHz

v01.1007
HMC620
GaAs MMIC I/Q MIXER
3 - 7 GHz
3
Pad Descriptions
Pad Number
Function
1
RF
2 (5)
IF2
3 (6)
IF1
4
LO
Description
This pad is DC coupled
and matched to 50 Ohms.
This pad is DC coupled. For applications not requir-
ing operation to DC, this port should be DC blocked
externally using a series capacitor whose value has
been chosen to pass the necessary IF frequency
range. For operation to DC, this pad must not
source/sink more than 3mA of current or die non-
function and possible die failure will result. Pads 5
and 6 are alternate IF ports.
This pad is DC coupled
and matched to 50 Ohms.
GND
The backside of the die must be connected
to RF/DC ground.
Interface Schematic
Assembly Diagrams
3 - 158
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com