HMC620_09 Datasheet, PDF (1/6 Pages) Hittite Microwave Corporation – GaAs MMIC I/Q MIXER 3 - 7 GHz

v01.1007
Typical Applications
The HMC620 is ideal for:
• Point-to-Point Radios
3
• Point-to-Multi-Point Radios
• WiMAX & Fixed Wireless
• VSAT
Functional Diagram
HMC620
GaAs MMIC I/Q MIXER
3 - 7 GHz
Features
Wide IF Bandwidth: DC - 3.5 GHz
High Image Rejection: 33 dB
High LO to RF Isolation: 45 dB
High Input IP3: +23 dB
Die Size: 1.49 x 1.15 x 0.10 mm
General Description
The HMC620 is a compact I/Q MMIC mixer which can
be used as either an Image Reject Mixer (IRM) or a
Single Sideband Upconverter. The chip utilizes two
standard Hittite double balanced mixer cells and a 90
degree hybrid fabricated in a GaAs MESFET process.
All data shown below is taken with the chip mounted
in a 50 Ohm test fixture and includes the effects of
1 mil diameter x 20 mil length bond wires on each
port. A low frequency quadrature hybrid was used to
produce a 100 MHz upper side band (USB) IF output.
This product is a much smaller and more consistent
alternative to hybrid style Image Reject Mixers and
Single Sideband Upconverter assemblies.
Electrical Specifications, T_A = +25° C, IF= 100 MHz, LO = +15 dBm*
Parameter
Min.
Typ.
Max.
Frequency Range, RF/LO
3.0 - 7.0
Frequency Range, IF
DC - 3.5
Conversion Loss (As IRM)
7.5
8.5
Image Rejection
25
28
1 dB Compression (Input)
+13
LO to RF Isolation
35
45
LO to IF Isolation
35
40
IP3 (Input)
23
Amplitude Balance
0.1
Phase Balance
3
* Unless otherwise noted, all measurements performed as downconverter.
Min.
Typ.
4.5 - 6.5
DC - 3.5
7.5
31
33
+13
35
45
35
40
23
0.2
3
Max.
9
Units
GHz
GHz
dB
dB
dBm
dB
dB
dBm
dB
Deg
3 - 154
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com