HMC453QS16G_06 Datasheet, PDF (20/22 Pages) Hittite Microwave Corporation – InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz

v01.0205
1900 MHz Evaluation PCB
HMC453QS16G / 453QS16GE
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.2 - 2.4 GHz
5
List of Materials for Evaluation PCB 108721-1900 ^[1]
Item
J1 - J2
J3
C1
C2
C3, C6
C4
C5
C7, C8
L1
Description
PCB Mount SMA Connector
2 mm DC Header
0.8 pF Capacitor, 0402 Pkg.
1.2 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
4.7 pF Capacitor, 0402 Pkg.
15 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
18 nH Inductor, 0402 Pkg.
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of VIA holes should be used
to connect the top and bottom ground planes. The
evaluation board should be mounted to an appropri-
ate heat sink. The evaluation circuit board shown is
available from Hittite upon request.
L2
20 nH Inductor, 0402 Pkg.
R1
5.6 Ohm Resistor, 0402 Pkg.
HMC453QS16G / HMC453QS16GE
U1
Linear Amp
PCB ^[2]
108719 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
5 - 315