HMC453QS16G_06 Datasheet, PDF (14/22 Pages) Hittite Microwave Corporation – InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz

v01.0205
HMC453QS16G / 453QS16GE
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
5
400 MHz Evaluation PCB
List of Materials for Evaluation PCB 110865-400 ^[1]
Item
J1 - J2
J3
C1, C5
C2, C10
C3
C4, C7
C6
C8, C9
L1
Description
PCB Mount SMA Connector
2 mm DC Header
12 pF Capacitor, 0402 Pkg.
8.2 pF Capacitor, 0402 Pkg.
6.8 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
39 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
47 nH Inductor, 0603 Pkg.
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of VIA holes should be used
to connect the top and bottom ground planes. The
evaluation board should be mounted to an appropri-
ate heat sink. The evaluation circuit board shown is
available from Hittite upon request.
L2
40 nH Inductor, 0402 Pkg.
L3, L4
4.3 nH Inductor, 0402 Pkg.
R1
5.1 Ohm Resistor, 0402 Pkg.
U1
PCB ^[2]
HMC453QS16G / HMC453QS16GE
Linear Amp
110863 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
5 - 309