HB28C048A6 Datasheet, PDF (1/66 Pages) Hitachi Semiconductor – FLASH ATA Card

HB28C048A6/HB28C032A6
HB28C016A6
FLASH ATA Card
48 MByte/32 MByte/16 MByte
ADE-203-1190A (Z)
Rev. 1.0
Dec. 1, 2000
Description
HB28C048A6, HB28C032A6, HB28C016A6 are Flash ATA card. This card complies with PC card ATA
standard and is suitable for the usage of data storage memory medium for PC or any other electric equipment.
This card is equipped with Hitachi 128 Mega bit Flash memory. This card is suitable for ISA (Industry
Standard Architecture) bus interface standard, and read/write unit is 1 sector (512 bytes) sequential access.
By using this card it is possible to operate good performance for the system which have PC card slots.
Features
• PC card ATA standard specification
 68 pin two pieces connector and Type II (5 mm)
• 3.3 V/5 V single power supply operation
• ISA standard and Read/Write unit is 512 bytes (sector) sequential access
 Sector Read/Write transfer rate: 8MB/sec burst
• Card density is 48 Mega bytes maximum
 This card is equipped Hitachi 128 Mega bit Flash memory
• 3 variations of mode access
 Memory card mode
 I/O card mode
 True IDE mode
• Internal self-diagnostic program operates at V_CC power on
• High reliability based on internal ECC (Error Correcting Code) function
• Data reliability is 1 error in 10^–14 bits read.
• Auto Sleep Function