FH12-33-S-0.5SH55 Datasheet, PDF (20/20 Pages) Hirose Electric – 0.5mm and 1mm Pitch Connectors For FPC/FFC

FH12 Seriesq0.5mm and 1mm Pitch Connectors For FPC/FFC
qVertical Mounting Type (common for 0.5mm/1mm Pitch)
Operation
Precautions
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Verify that the actuator is positioned upright. If the
actuator has rotated to the side, carefully rotate it
upright.
Actuator upright
1) Avoid forcing the actuator up or down without the
FPC/FFC inserted.
2) Insert the FPC/FFC vertically in the connector slot
assuring that the conductive traces of the
FPC/FFC are facing away from the actuator.
Stiffener
FPC/FFC conductive traces
2) Do not insert the FPC/FFC diagonally.
Doing so will result in the corners of the FPC/FFC
catching on the contacts and will cause deforma-
tion of the contacts.
Slot
3) Press down the actuator in the direction shown.
2. FPC/FFC Removal
Rotate the actuator upward and withdraw the FPC/FFC.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: [phone], FAX: [phone]
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.
20