FH12-33-S-0.5SH55 Datasheet, PDF (16/20 Pages) Hirose Electric – 0.5mm and 1mm Pitch Connectors For FPC/FFC

FH12 Seriesq0.5mm and 1mm Pitch Connectors For FPC/FFC
sRecommended Temperature Profile
MAX 250ç
250
230ç
200
200ç
150
(ç)
100
150ç
50
25ç
(60 seconds) 90 to 120 seconds
30 seconds
0
Start
60 Preheating 120 Soldering
Time
HRS test conditions
Solder method
:Reflow, IR/hot air
Environment:
:Room air
Solder composition :Paste, 96.5%Sn/3%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.’s
Part Number: M705-221CM5-32-10.5)
Test board
:Glass epoxy 40mm∞80mm∞1.6mm thick
Land dimensions :Top and bottom
contact type 0.3mm∞1.3mm
Vertical mounting type 0.6mm∞1.5mm
Metal mask
:Top and bottom contact type
0.25mm∞1.3mm∞0.15mm thick
Vertical mounting type
0.5mm∞1.5mm∞0.15mm thick
This temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
16