|
FH26-23S-0.3SHW05 Datasheet, PDF (2/12 Pages) Hirose Electric – 0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors | |||
|
◁ |
FH26 SeriesG0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
ISpecifications
Rating
Current rating 0.2A DC
Voltage rating 30V AC
Operating temperature range -55 ç to +85ç (Note 1)
Operating humidity range Relative humidity 90%
max. (No condensation)
Storage temperature range -10ç to +50ç (Note 2)
Storage humidity range Relative humidity 90% max.
Recommended FPC :
Thickness: = 0.2±0.03mm gold plated
Item
Specification
Conditions
1. Insulation resistance 50 M ohms min.
100 V DC
2. Withstanding voltage No flashover or insulation breakdown.
90 V AC /one minute
3. Contact resistance
4. Durability
(Insertion/ withdrawal)
5. Vibration
6. Shock
7. Humidity
(Steady state)
8. Temperature cycle
9. Resistance to soldering heat
100 m ohms max.
* Including FPC conductor resistance
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
No electrical discontinuity of 1µs or more.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
No electrical discontinuity of 1µs. min.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No affect on appearance or performance.
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No damage, cracks, or parts looseness.
No deformation of components affecting performance.
1 mA
10 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles, 3
directions.
Acceleration of 981 m/s2, 6 ms duration, sine half-wave waveform,
3 cycles in each of the 3 axis
96 hours at temperature of 40±2ç and humidity of 90% to 95%.
Temperature: -55 ç/+15ç to +35ç/+85ç/+15ç to +35ç
Time: 30 / 2 to 3 / 30 / 2 to 3 (Minutes)
5 cycles
Reflow: At the recommended temperature profile
Manual soldering: 350ç +/-10ç for 5±1 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
IMaterials
Part
Insulator
Contacts
Metalfittings
Material
LCP
PA
Phosphor bronze
Finish
Color: Black
FH26 series: Deep brown
FH26W series: Light brown
Gold plating
Pure tin reflow plating
Remarks
UL94V-0
UL94HB
---------------
---------------
IOrdering information
FH 26 W - 51S - 0.3 SHW (05)
1
23
4
5
6
7
1 Series name: FH
2 Series No.: 26
3 Blank: Standard
W: Satisfies halogen-free requirements
(Flame retardance UL94HB).
4 Number of positions: 13 to 71
5 Contact pitch: 0.3mm
6 Termination type SHW: SMT horizontal staggered mounting type
7 Specifications
(05)â¦Gold plating, 5,000 pieces / reel
(10)â¦Gold plating with nickel barrier, 5,000 pieces / reel
(98)â¦Gold plating, 500 pieces / reel
(99)â¦Gold plating with nickel barrier, 500 pieces / reel
2
|
▷ |