C9311DK Datasheet, PDF (6/6 Pages) Hamamatsu Corporation – Flat panel sensor High sensitivity, high-speed frame rate, high resolution

Flat panel sensor C9311DK
s Dimensional outline (unit: mm, tolerance: ±1 mm unless otherwise noted)
FROM
SINTILLATOR TO
TOP COVER
10.5 *
52.75
76.75
39.5 11 7
8*
151 *
19 *
ACTIVE AREA 123
(0, 575)
(1247, 0)
(0, 576)
(1247, 1151)
(6 ×) M3 DEPTH 5
35.8
187
* ±0.5
Window material is carbon fiber (1.0 mm thickness).
Weight: 4.0 kg
KACCA0163ED
s Notice
· Do not subject the Flat Panel Sensor to strong vibration or shock. (Strong shock such as drop impacts may cause permanenat
damage to the sensor.)
· Users must take responsibility for implementing X-ray shielding safety measures to avoid the risk of X-ray exposure.
· Data listed in this datasheet is defined at the time of shipment. Characteristics may vary somewhat due to exposure to X-rays
so take proper countermeasures such as making periodic image correction.
· This product is warranted for a period of 12 months after the date of the shipment.
The warranty is limited to replacement or repair of any defective product due to defects in workmanship or materials used in
manufacture. The warranty does not cover loss or damage caused by natural disaster, misuse (including modifications and any
use not complying with the environment, application, usage and storage conditions described in this datasheet), or total
radiation dose over 25000 Roentgen (90 kV) even within the warranty period.
C9311DK conforms to European EMC directives:
EN61326 Class A.
s Frame grabber cables
Frame grabber
Cable type No.
A8406-41
General-purpose
A8406-46
A8406-47
A8406-48
A8406-42
IMAQ PCI-1424 *⁷
A8406-43
A8406-44
A8406-45
*7: Made by NI (National Instruments Corporation)
*8: Made by Honda Tsushin Kogyo Co. Ltd.
Cable length
5m
7m
10 m
12 m
5m
7m
10 m
12 m
Cable end
PCS-E80FA *⁸
Cable end
open
PCS-XE100MA+ *⁸
Note: The detailed information for these optional cables is shown in the datasheet of A8406 series.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone], www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]
6
Cat. No. KACC1115E08
Sept. 2007 DN