S7017 Datasheet, PDF (1/8 Pages) Hamamatsu Corporation – CCD area image sensor

IMAGE SENSOR
CCD area image sensor
S7017 series
Four-stage TE-cooled, front-illuminated FFT-CCDs
S7017 series is a family of FFT-CCD area image sensors specifically designed for low-light-level detection in scientific applications. By using the
binning operation, S7017 series can be used as a linear image sensor having a long aperture in the direction of the device length. This makes
S7017 series ideally suited for use in spectrophotometry. The binning operation offers significant improvement in S/N and signal processing
speed compared with conventional methods by which signals are digitally added by an external circuit. S7017 series also features low noise and
low dark signal (MPP mode operation). These enable low-light-level detection and long integration time, thus achieving a wide dynamic range.
S7017 series has a pixel size of 24 × 24 µm and is available in active area of 24.576 (H) × 2.976 (V) and 24.576 (H) × 6.048 (V) mm.
A four-stage Peltier element is built into the same package for thermoelectric cooling. At room temperature operation, the device can be cooled
down to -70 ˚C with using forced air cooling. In addition, since both the CCD chip and Peltier element are hermetically sealed, no dry air is
required, thus allowing easy handling.
Features
q 1024 (H) × 124 (V) and 1024 (H) × 252 (V) pixel format
q Pixel size: 24 × 24 µm
q 100 % fill factor
q Wide dynamic range
q Low dark current
q Low readout noise
q MPP operation
q Four-stage TE-cooled
Applications
q Astronomy
q Scientific measuring instrument
q Fluorescence spectrometer
q Raman spectrophotometer
q Optical and spectrophotometric analyzer
q For low-light-level detection requiring
s Selection and order guide
Type No.
Cooling
Number of
total pixels
S7017-1007
Four-stage
1044 × 128
S7017-1008
TE-cooled
1044 × 256
S7017 series has a hermetically-sealed package with AR-coated sapphire window.
Number of
active pixels
1024 ×124
1024 × 252
Active area
[mm (H) × mm (V)]
24.576 × 2.976
24.576 × 6.048
s General ratings
Parameter
CCD structure
Fill factor
Number of active pixels
Pixel size
Active area
Vertical clock phase
Horizontal clock phase
Output circuit
Package
Window
Specification
Full frame transfer
100 %
S7017-1007: 1024 (H) × 124 (V)
S7017-1008: 1024 (H) × 252 (V)
24 (H) × 24 (V) µm
S7017-1007: 24.576 (H) × 2.976 (V) mm
S7017-1008: 24.576 (H) × 6.048 (V) mm
2 phase
2 phase
One-stage MOSFET source follower
28 pin metal package
AR coated Sapphire
1