S10604-200CT_15 Datasheet, PDF (1/7 Pages) Hamamatsu Corporation – Photo IC diode

Photo IC diode
S10604-200CT
COB (chip on board) type, small package
1 mm
The S10604-200CT photo IC has spectral response close to human eye sensitivity. Two photosensitive areas are made on a sin-
gle chip. Almost only the visible range can be measured by finding the difference between the two output signals in the internal
current amplifier circuit. Effects of infrared remote control light on sensitivity are reduced when compared to previous types.
Features
Spectral response close to human eye sensitivity
Small package: 2.0 × 1.25 × 0.8^t mm
About 1/5 the cubic volume of previous type (S9067-201CT)
Lower output-current fluctuations compared with
phototransistors
Excellent linearity
Low output fluctuations for light sources producing the
same illuminance at different color temperatures
Suitable for lead-free reflow (RoHS compliance)
Applications
Liquid crystal monitor backlight dimmer for cellular phone
Energy-saving sensor for large-screen TVs, etc.
Light dimmers for liquid crystal panels
Various types of light level measurement
Absolute maximum ratings (Ta=25 °C)
Parameter
Symbol
Condition
Value
Unit
Reverse voltage
VR
-0.5 to +12
V
Photocurrent
IL
5
mA
Forward current
IF
5
mA
Power dissipation*¹
P
150
mW
Operating temperature
Topr No dew condensation*²
-30 to +80
°C
Storage temperature
Tstg No dew condensation*²
-40 to +85
°C
Reflow soldering condition*³
Tsol
Peak temperature 260 °C, two times (See page 5)
-
*1: Power dissipation decreases at a rate of 2 mW/°C above Ta=25 °C.
*2: When there is a temperature difference between a product and the surrounding area in high humidity environment, dew
condensation may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and
reliability.
*3: JEDEC level 3
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
Electrical and optical characteristics (Ta=25 °C)
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Spectral response range
λ
-
300 to 820
-
nm
Peak sensitivity wavelength
λp
-
560
-
nm
Dark current
ID VR=5 V
-
1
50
nA
Photocurrent
IL VR=5 V, 2856 K, 100 lx
0.21
-
0.39
mA
Rise time*⁴
tr
10 to 90%, VR=7.5 V
RL=10 kΩ, λ=560 nm
-
6.0
-
ms
Fall time*⁴
tf
90 to 10%, VR=7.5 V
RL=10 kΩ, λ=560 nm
-
2.5
-
ms
*4: Rise/fall time measurement method (P.2)
www.hamamatsu.com
1