MB6 Datasheet, PDF (3/4 Pages) GREATECS – SMT Double Action Switch

Multi-Direction Switches
SMT Double Action Switch
MB6 Series
Operating
6 Force È¿
Refer to part on drawing
-
Stroke
Placing the switch such that the 1 Contact Resistance:
direction of switch operation is
10Ÿ Max
vertical, a static load of 3 kgf
2 Insulation Resistance:
7
Stop _{(29.4N)shall be applied in the}
Strength _{direction of stem operation for a}
10MŸ Min
3 Bounce:
period of 15 seconds
20 m seconds max
4 Voltage: AC 250V 1minute
Min
1 Shall be free from
pronounced backlash and
falling-off or breakage
terminals
8
Solder Heat
Resistance
ɎġSMT Type~MB6 Series
2 Contact Resistance:
10Ÿ Max
3 Insulation Resistance:
10MŸ Min
4 Bounce:
20 m seconds max
5 Voltage: AC 250V
1minute Min
Shall be vibrated in accordance
with Method 201A of
MIL-STD-202F
1 Contact Resistance:
Range of oscillation:10 to 55 Hz
10Ÿ Max
1)Swing distance =1.5mm
2 Insulation Resistance:
9 Vibration ^{2)Frequency: 10-55-10Hz in}
1-min/cycle.
10MŸ Min
3 Bounce:
3)Direction of oscillation: Three
20 m seconds max
mutually perpendicular directions, ^{4 Voltage: AC 250V 1minute}
including the directions of stem
Min
travel.
4)Test time: 2 hours each direction
Shall be shocked in accordance with
Method 213B condition A of
MIL-STD-202F
10 Shock 1)Acceleration; 50G
Ditto
2)Action time:11±1m seconds
3)Testing Direction: 6 sides
4)Test Cycle: 3 times in each direction
H01 [e-mail]
www.greatecs.com 3