MB6 Datasheet, PDF (2/4 Pages) GREATECS – SMT Double Action Switch

Multi-Direction Switches
SMT Double Action Switch
MB6 Series
SPECIFICATIONS
1. Style
This specification describes ”DOUBLE ACTION SWITCH”, mainly used as signal
switch of electric devices, with the general requirements of mechanical and
electrical characteristic.
1.1 Operating Temperature Range : -20 ɗ~+70ɗ
1.2 Storage Temperature Range : -30ɗ~+85ɗ
2. Current Range: 50mA, 12V DC
3. Type of Actuation: Double Action Tactile Feedback
4. Test Sequence:
ITEM DESCRIPTION
TEST CONDITIONS
REQUIREMENTS
There shall be no
1
Visual By visual examination check without defects that affect the
Examination any out pressure & testing
serviceability of the
product.
Applying a static load twice the
2
Contact
Resistance
actuating fore to actuator.
Measurements shall be made with a 100mŸ Max
1 kHz small current contact
resistance meter.(20mV 50mA max)
Measurements shall be made
3
Insulation following application of 100 V DC
Resistance potential across terminals and
100MŸ Min
across terminals and frame.
4
Dielectric
Withstanding
Voltage
250 V AC(50Hz or 60Hz) shall be
applied across terminals and across
terminals and frame for 1 minute.
There shall be no
breakdown or flashover
Lightly striking the actuator at a rate _{20 m seconds Max.}
encountered 3 to 4 operations per
sec, bounce shall be tested at “ON”
and “OFF”
5
Bounce
5V DC 5KŸ
H01 [e-mail]
www.greatecs.com 2