050_115 Datasheet, PDF (5/13 Pages) Glenair, Inc. – Media Converter

050-115
Media Converter, Single or Dual Channel, Panel Mount
10/100/1000BASE-T to CWDM Fiber Optic Ethernet
Built In Test (BIT) Functionality - Optional Features
This media converter can be offered with built in test functionality accessible through a Console Port via Universal Serial
Bus 2.0 (USB 2.0) or via 3.3V CMOS UART (RXD, TXD) or both options can be made available. Functional block
diagram for this is shown below.
Universal Serial Bus (2.0) BIT
• Presents itself as a “Virtual” Communications Port
• Compatible with Microsoft Windows, Mac, and Linux OS’s.
• On the computer side, open any terminal application (PuTTY, HyperTERM, TeraTERM, etc.) to communicate with
the media converter hardware.
• Simple “Human Readable” status messages.
RS422 UART (TXD) BIT
• Useful for when you are interfacing with a embedded microprocessor or micro controller.
• Status messages delimitated to allow for easy parsing by embedded software.
ALARM STATUS MESSAGES
Fiber Side Alarm/Status
• Temperature
• Transmitter Disable Status
• Transmitter Fault Alarm Status
• Receiver loss of signal (LOS) or signal Detect (SD) Status
Copper Side Status
• Link Status (Up or Down)
Unit Identification Information
• Unit Serial Number
• Unit Product Code
• Unit Description
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 2
∙ 1211 AIR WAY
US Cage Code 06324
∙ GLENDALE, CA 91201-2497 ∙ TEL: [phone]
PAGE 5 of 13
Printed in USA
∙ FAX: [phone]
E-mail: [e-mail]