050_115 Datasheet, PDF (2/13 Pages) Glenair, Inc. – Media Converter

050-115
Media Converter, Single or Dual Channel, Panel Mount
10/100/1000BASE-T to CWDM Fiber Optic Ethernet
10/100/1000BASE-T to 1000BASE-CWDM
The Glenair 050-115 is a 10/100/1000BASE-T to Fiber Media converter that can
be configured for 1 or 2 channels and can support conversion to 1000BASE-
CWDM (with the optical loss budget derivative of 1000BASE-LX) protocol. It is
designed for harsh environments and incorporates electronics in an
environmentally sealed enclosure that incorporates two environmental M38999
connectors. One connector is utilized for power and electrical signal and the
second connector is used for the Fiber Optic signals and can be configured to
support either single mode or multi-mode fiber applications.
The Glenair 050-115 is intended to be used with external passive CWDM to
combine send and receive signals on a single fiber.
KEY FEATURES/BENEFITS
 CWDM DFB Lasers for 1000BASE-CWDM
 InGaAs PIN PD for 1000BASE-CWDM
 Wide Input Voltage Range: 5-36V
 Electrical Interface compliant with IEEE
802.3 (10/100/1000BASE-T)
 Optical Interface derived from IEEE 802.3
(1000BASE-LX10)
 -20C to +55C Operating Range
 Magnetics on the electrical signal input side to support
10/100/1000BASE-T operation over 100m Cat 5E
 IP67 in mated condition
 M38999 Electrical Signal & Power
 M38999 Fiber Optic Connector
 Panel Mount
OPTIONAL FEATURES
 Built In Test Console Port accessible via USB2.0
 Built in Test Console Port accessible via UART
APPLICATIONS
• Harsh Environment Ethernet for Airborne, Tactical and
Shipboard applications
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 2
∙ 1211 AIR WAY
US Cage Code 06324
∙ GLENDALE, CA 91201-2497 ∙ TEL: [phone]
PAGE 2 of 13
Printed in USA
∙ FAX: [phone]
E-mail: [e-mail]