050_115 Datasheet, PDF (3/13 Pages) Glenair, Inc. – Media Converter

050-115
Media Converter, Single or Dual Channel, Panel Mount
10/100/1000BASE-T to CWDM Fiber Optic Ethernet
Functional Block Diagram
SINGLE OR DUAL MEDIA CONVERTER
Note: Fiber Optic Channels can be 1000BASE-CWDM according to the wavelengths described in the
following table
Other Fiber Optic connections are possible – Contact Factory
Central Wavelength Table
Part Number Development - Wavelength Identifier
Central Wavelength (nm)
L1
1271
L2
1291
L3
1311
L4
1331
L5
1351
L6
1371
L7
1391
L8
1411
NP
NP = Not Populated (none)
Note: This table is used to define the wavelengths for Channel 1 and Channel 2. If Channel 2 is not
populated then use “NP” designator. The first 2 letters designate Channel 1 and the second 2 letters
designate Channel 2. Channel 1 must always be populated.
Example) “L1L2” in the part number development designates central wavelength for:
Channel 1 (first 2 letters are L1 = 1271nm)
Channel 2 (second 2 letters are L2 =1291nm)
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 2
∙ 1211 AIR WAY
US Cage Code 06324
∙ GLENDALE, CA 91201-2497 ∙ TEL: [phone]
PAGE 3 of 13
Printed in USA
∙ FAX: [phone]
E-mail: [e-mail]