FA1000-62-85A1-0024A Datasheet, PDF (4/18 Pages) Glenair, Inc. – The Glenair Eye-Beam™ Fiber Optic Revolution

QwikConnect
Glenair Eye-Beam^™ ordering information
Eye-Beam™ is supplied as either a factory terminated contact pigtail or point-to-point jumper. Pigtail assemblies
are supplied in numerous contact formats for use with most high performance, tactical fiber optic connection
systems. For example, Glenair Eye-Beam^™ lens contacts with their unique expanded beam capability are supplied
for MIL-DTL-38999, MIL-PRF-28876, GFOCA, and Series 80 Mighty Mouse, and are uniquely suitable for use in hybrid
electrical/optical interconnect applications.
The supply of the pre-terminated expanded beam lens contacts allows users to perform a much simpler and
easier fusion splice of pigtail wires in the field as opposed to actual contact termination, thus ensuring factory-level
performance and low dB loss in the system.
Glenair Eye-Beam^™ fiber optics are also supplied in point-to-point jumpers with pin/socket, pin/pin, and socket/
socket configurations. In addition, Glenair can supply Eye-Beam^™ expanded beam jumpers with standard commercial
type connectors at one end.
Factory terminated lens pin contact (top) and lens socket contacts on pigtail wires allow for
easier fusion splicing in the field.
6
QwikConnect n January 2011
HOW To order
1. Eye-Beam^™ system part numbers begin with the FA1000 Basic Part Number
2. Select fiber size (Consult factory for additional options)
3. Select operating wavelength
4. Select pigtail or jumper cable configuration. Pigtails and jumpers are supplied standard with 36 inches of fiber cable.
Specific lengths available in part number breakdown as shown below.
Basic Part
Number
Operating
Wavelength
85 = 850nm
13 = 1300/1310nm
15 = 1550nm
End B
(See Table II)
Temperature Rating:
A = -40°C to +85°C
B = -55°C to +125°C
C = Customer Specified*
FA1000 - 50 - 85 A 1 - XXXX A
Fiber Size
09 = 9.3/125 Singlemode
50 = 50/125 Multimode
62 = 62.5/125 Multimode
End A
(See Table I)
Length in Inches
(Omit for Standard 36 Inches)
Ex: -0010 = 10 inches
*Note: For customer specific connectors and fiber, Glenair will assign a unique
part number for the cable assembly.
Table I Eye-Beam^™ Contacts
Designator Description
Connector Series
A
M29504/4 Style Pin (181-070)
MIL-DTL-38999
B
M29504/5 Style Socket (181-071) MIL-DTL-38999
C
M29504/14 Style Pin (181-XXX) MIL-PRF-28876
D
M29504/15 Style Socket (181-XXX) MIL-PRF-28876
E
Mighty Mouse Pin (181-XXX)
Series 80 Mighty Mouse
F
Mighty Mouse Socket (181-XXX) Series 80 Mighty Mouse
G
COTS Pin (181-XXX)
Glenair COTS System
H
COTS Socket (181-XXX)
Glenair COTS System
J
GFOCA Termini (181-067)
GFOCA (hermaphroditic)
QwikConnect n January 2011
Table II
A M29504/4 Style Pin (181-070)
B M29504/5 Style Socket (181-071)
C M29504/14 Style Pin (181-XXX)
D M29504/15 Style Socket (181-XXX)
E Mighty Mouse Pin (181-XXX)
F Mighty Mouse Socket (181-XXX)
G COTS Pin (181-XXX)
H COTS Socket (181-XXX)
J GFOCA Termini (181-067)
1 LC Connector
2 LC APC Connector
3 FC Connector
4 FC APC Connector
5 ST Connector
6 SC Connector
7 SMA 905 Connector
8 SMA 906 Connector
9 Customer Specified*
7