MB82DP04184E-65L Datasheet, PDF (7/31 Pages) Fujitsu Component Limited. – 64M Bit (4 M word × 16 bit) Mobile Phone Application Specific Memory

MB82DP04184E-65L
■ ELECTRICAL CHARACTERISTICS
1. DC Characteristics
(Under recommended operating conditions unless otherwise noted)
Parameter
Symbol
Test conditions
Value
Unit
Min Max
Input Leakage Current
ILI
VSS ≤ VIN ≤ VDD
−1.0 +1.0 µA
Output Leakage Current
ILO VSS ≤ VOUT ≤ VDD, Output Disable
−1.0 +1.0 µA
Output High Voltage
VOH VDD = VDD Min, IOH = −0.5 mA
2.4
⎯
V
Output Low Voltage
VOL IOL = 1 mA
⎯
0.4
V
VDD Power Down Current
IDDPS
IDDP8
IDDP16
VDD = VDD Max,
VIN = VDD or VSS,
CE2 = VSS
Sleep
⎯
8M-bit Partial ⎯
16M-bit Partial ⎯
10 µA
100 µA
120 µA
IDDS
VDD = VDD Max, VIN = VIH or VIL,
CE1 = CE2 = VIH
⎯
1.5 mA
VDD Standby Current
IDDS1
VDD = VDD Max, VIN = VDD or VSS,
CE1 = CE2 = VDD
TA ≤ + 85 °C
TA ≤ + 40 °C
⎯
⎯
200 µA
100 µA
VDD Active Current
VDD Page Read Current
IDDA1
IDDA2
VDD = VDD Max,
VIN = VIH or VIL,
CE1 = VIL and CE2 = VIH,
IOUT = 0 mA
tRC/tWC = Min
⎯
tRC/tWC = 1 µs
⎯
VDD = VDD Max, VIN = VIH or VIL,
IDDA3 CE1 = VIL and CE2 = VIH,
⎯
IOUT = 0 mA, tPRC = Min
40 mA
5 mA
10 mA
Notes : • All voltages are referenced to VSS.
• IDD depends on the output termination, load conditions, and AC characteristics.
• After power on, initialization following power-up timing is required.
DC characteristics are guaranteed after the initialization.
• IDDPS, IDDP8, IDDP16, and IDDS1 might be higher for up to 600 ms after power-up or Power Down/standby mode
entry.
7