MB54608L Datasheet, PDF (7/15 Pages) Fujitsu Component Limited. – 1.0 GHz band Low Power I/Q Modulator For Direct Conversion

MB54608L/MB54608B
s ABSOLUTE MAXIMUM RATINGS
Parameter
Power supply voltage
Output voltage
Input voltage
Allowed voltage on the open
collector pin
Output current
Storage temperature
Symbol
VCC
VO
VI
VOC
IO
Tstg
Rating
Min.
Max.
–0.5
+5.0
–0.5
VCC + 0.5 (<5.0)
–0.5
VCC + 0.5 (<5.0)
VCC – 0.3
(–0.5)
VCC + 0.3
(5.0)
0
+10
–55
+125
Unit
V
V
V
V
mA
°C
Remarks
Out pin,
Open is prohibited.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Power supply voltage
Input voltage
Allowed voltage on the open
collector pin
Operating temperature
Symbol
VCC
VI
Min.
2.6
GND
VOC
VCC – 0.2
Ta
–20
Value
Typ.
3.0
—
—
—
Max.
3.8
VCC
VCC + 0.2
+75
Unit
Remarks
V
V
V
Out pin.
Open is prohibited.
V Ambient temperature.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
7