MB54608L Datasheet, PDF (5/15 Pages) Fujitsu Component Limited. – 1.0 GHz band Low Power I/Q Modulator For Direct Conversion

MB54608L/MB54608B
• MB54608B (BCC-16)
Pin no.
Pin nane I/O
1
XQ
I
2
XI
I
3
I
I
4
Mode
—
5
Vcc
—
6
Out
O
7
PSQ
I
8
N.C.
—
9
GND
—
10
N.C.
—
11
Lo
I/O
12
Lox
I/O
13
Vcc
—
14
GND
—
15
GND
—
16
Q
I
Descriptions
Q signal complementary input for the I/Q modulator.
I signal complementary input for the I/Q modulator.
I signal input for the I/Q modulator.
Output mode switch. Mode=Open: Low power mode.
Mode=GND: High power mode.
This pin should be connected to ground or left open.
Power supply for the I/Q modulator.
Output for the I/Q modulator. (Open collector)
Open is prohibited when power is supplied to Vcc pin.
Power saving control for the I/Q modulator. When PSQ = L(GND), power
down mode is selected.
No connection.
Ground.
No connection.
Lo input for the I/Q modulator (Output for the offset mixer.)
Lo complementary input for the I/Q modulator (Complementary output for
the offset mixer.)
Power supply for the I/Q modulator.
Ground.
Ground.
Q signal input for the I/Q modulator.
5