MB54608L Datasheet, PDF (2/15 Pages) Fujitsu Component Limited. – 1.0 GHz band Low Power I/Q Modulator For Direct Conversion

MB54608L/MB54608B
(Continued)
• Low current: Please refer to below table.
• Offset mixer on-chip: The separate power supply control is possible. (only MB54608L)
• Output power level switch (Mode) enables high power mode
Normal
operation
Power down
Icc
Pout(VBB=1.0 Vp–p)
Ips
Offset Mixer not used
Offset Mixer used
Mode = Open Mode = GND Mode = Open Mode = GND
16.5 mA
19.0 mA
22.5 mA
25.0 mA
–4 dBm
–2 dBm
–4 dBm
–2 dBm
0.22 mA
0.44 mA
Note:Typical values
Further increase of the output power is possible by attaching a resistor at Pcnt pin.
• Operating temperature range: Ta = –20 to +75°C
2