MB15F07SL Datasheet, PDF (7/27 Pages) Fujitsu Component Limited. – Dual Serial Input PLL Frequency Synthesizer

MB15F07SL
(Continued)
(VCC = 2.4 to 3.6 V, Ta = –40 to +85°C)
Parameter
Symbol
Condition
Min.
Value
Unit
Typ. Max.
VCC = 3.0 V, CS bit = “H”
–
“H” level output current
IDOH^*4 VDOH = VCC/2,
Do1
Ta = +25°C ^{CS bit = “L”}
–
Do2
VCC = 3.0 V, CS bit = “H”
–
“L” level output current
IDOL VDOL= VCC/2,
Ta = +25°C ^{CS bit = “L”}
–
–6.0
–1.5
6.0
1.5
–
–
mA
–
–
IDOL/IDOH IDOMT^*5 VDO = VCC/2
–
3
–
%
Charge pump
current rate
vs VDO IDOVD^*6 0.5 V ≤ VDO ≤ VCC – 0.5 V
–
10
–
%
vs Ta
IDOTA^*7
–40°C ≤ Ta ≤ +85°C,
VDO = VCC/2
–
10
–
%
*1: Conditions; fosc = 12 MHz, Ta = +25°C, in locking state.
*2: VCC1 = VCC2 = 3.0 V, fosc = 12.8 MHz, Ta = +25°C, in power saving mode.
*3: AC coupling. 1000pF capacitor is connected under the condition of min. operating frequency.
*4: The symbol “–” (minus) means direction of current flow.
*5: VCC = 3.0 V, Ta = +25°C (|I3| – |I4|)/[(|I3| + |I4|)/2] × 100(%)
*6: VCC = 3.0 V, Ta = +25°C [(|I2| – |I1|)/2]/[(|I1| + |I2|)/2] × 100(%) (Applied to each IDOL, IDOH)
*7: VCC = 3.0 V, [|IDO(+85°C) – IDO(–40°C)|/2]/[|IDO(+85°C) + IDO(–40°C)|/2] × 100(%) (Applied to each IDOL, IDOH)
*8:
Prescaler divided ratio Charge pump current Vfin1(min)
fin1
64/65
1.5 mA mode
–10 dBm
6.0 mA mode
–10 dBm
128/129
1.5 mA mode
–15 dBm
6.0 mA mode
–15 dBm
Prescaler divided ratio Charge pump current Vfin2(min)
fin2
64/65
1.5 mA mode
–15 dBm
6.0 mA mode
–10 dBm
128/129
1.5 mA mode
–15 dBm
6.0 mA mode
–15 dBm
I1
I3
IDOL
I2
IDOH
I2
I4
I1
0.5
Vcc/2 Vcc − 0.5 Vcc
Charge Pump Output Voltage (V)
7