CS101_07 Datasheet, PDF (7/12 Pages) Fujitsu Component Limited. – Standard Cell

CS101 Series
■ ELECTRICAL CHARACTERISTICS
• Dual power supply : VDDE = 1.8 V, VDDI = 1.0 V/VDDI = 1.2 V
(VDDE = 1.8 V ± 0.15 V, VDDI = 1.0 V ± 0.1 V/VDDI = 1.2 V ± 0.1 V, VSS = 0 V, Tj = −40 °C to +125 °C)
Parameter
Symbol
Conditions
Value
Unit
Min
Typ
Max
“H” level output voltage
VOH
1.8 V output,
IOH = −100 μA
VDDE − 0.2
⎯
VDDE
V
“L” level output voltage
VOL
1.8 V output,
IOL = 100 μA
0
⎯
0.2
V
Input leakage current*
IL
⎯
− 10
⎯
+ 10
μA
Pull-up/Pull-down resistor
1.8 V
RP VIL = 0 V at pull-up/
40
VIH = VDDE at pull-down
80
155
kΩ
* : The input leakage current may exceed the above value when an input buffer with pull-up or pull-down resistor
is used.
• Dual power supply : VDDE = 2.5 V, VDDI = 1.0 V/VDDI = 1.2 V
(VDDE = 2.5 V ± 0.2 V, VDDI = 1.0 V ± 0.1 V/VDDI = 1.2 V ± 0.1 V, VSS = 0 V, Tj = −40 °C to +125 °C)
Parameter
Symbol
Conditions
Value
Unit
Min
Typ
Max
“H” level output voltage
VOH
2.5 V output,
IOH = −100 μA
VDDE − 0.2
⎯
VDDE
V
“L” level output voltage
VOL
2.5 V output,
IOL = 100 μA
0
⎯
0.2
V
Input leakage current*
IL
⎯
− 10
⎯
+ 10
μA
2.5 V
Pull-up/Pull-down resistor
RP VIL = 0 V at pull-up/
25
50
85
kΩ
VIH = VDDE at pull-down
* : The input leakage current may exceed the above value when an input buffer with pull-up or pull-down resistor
is used.
• Dual power supply : VDDE = 3.3 V, VDDI = 1.0 V/VDDI = 1.2 V
(VDDE = 3.3 V ± 0.3 V, VDDI = 1.0 V ± 0.1 V/VDDI = 1.2 V ± 0.1 V, VSS = 0 V, Tj = −40 °C to +125 °C)
Parameter
Symbol
Conditions
Value
Unit
Min
Typ
Max
“H” level output voltage
VOH
3.3 V output,
IOH = −100 μA
VDDE − 0.2
⎯
VDDE
V
“L” level output voltage
VOL
3.3 V output,
IOL = 100 μA
0
⎯
0.2
V
Input leakage current*
IL
⎯
−10
⎯
+ 10
μA
3.3 V
Pull-up/Pull-down resistor
RP VIL = 0 V at pull-up/
15
33
70
kΩ
VIH = VDDE at pull-down
* : The input leakage current may exceed the above value when an input buffer with pull-up or pull-down resistor
is used.
7