MB15F86UL Datasheet, PDF (5/28 Pages) Fujitsu Component Limited. – Fractional-N PLL Frequency Synthesizer

MB15F86UL
s ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Symbol
Unit
Min
Max
Power supply voltage
VCC
−0.5
+4.0
V
Vp
VCC
+4.0
V
Input voltage
VI
−0.5
VCC + 0.5
V
LD / fout
VO
GND
VCC
V
Output voltage
Do
VDO
GND
Vp
V
Storage temperature
Tstg
−55
+125
°C
Note : Permanent device damage may occur if the above Absolute Maximum Ratings are exceeded. Functional
operation should be restricted to the conditions as detailed in the operational sections of this data sheet.
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Min
Value
Typ
Unit
Remark
Max
Power supply voltage
VCC
2.7
3.0
3.6
V
VCCRF = VCCIF
Vp
VCC
3.0
3.6
V
Input voltage
VI
GND

VCC
V
Operating temperature
Ta
−40

+85
°C
Handling Precautions
(1) VCCRF, VpRF, VCCIF and VpIF must supply equal voltage.
Even if either RF-PLL or IF PLL is not used, power must be supplied to VCCRF, VpRF, VCCIF and VpIF to
keep them equal. It is recommended that the non-use PLL is controlled by power saving function.
(2) To protect against damage by electrostatic discharge, note the following handling precautions :
-Store and transport devices in conductive containers.
-Use properly grounded workstations, tools, and equipment.
-Turn off power before inserting or removing this device into or from a socket.
-Protect leads with conductive sheet, when transporting a board mounted device.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
5