MB15E03L Datasheet, PDF (5/25 Pages) Fujitsu Component Limited. – Single Serial Input PLL Frequency Synthesizer On-Chip 1.2 GHz Prescaler

MB15E03L
s ABSOLUTE MAXIMUM RATINGS
Parameter
Power supply voltage
Input voltage
Output voltage
Output current
Storage temperature
Symbol
VCC
VP
VI
VO
IO
I Od
Tstg
Rating
Min.
Max.
–0.5
+4.0
VCC
+6.0
–0.5
VCC +0.5
–0.5
VCC +0.5
–10
+10
–25
+25
–55
+125
Unit
V
V
V
V
mA
mA
°C
Remark
Except D O output
D O output
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Value
Symbol
Unit
Min.
Typ.
Max.
Remark
Power supply voltage
VCC
2.7
3.0
3.6
V
VP
VCC
–
6.0
V
Input voltage
VI
GND
–
VCC
V
Operating temperature
Ta
–40
–
+85
°C
WARNING: Recommended operating conditions are normal operating ranges for the semiconductor device. All
the device’s electrical characteristics are warranted when operated within these ranges.
Always yse semiconductor devices within the recommended operating conditions. Operation outside
these ranges may adversely affect reliability and could result in device failure.
No warranty is made with repect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representative beforehand.
Handling Precautions
• This device should be transported and stored in anti-static containers.
• This is a static-sensitive device; take proper anti-ESD precautions. Ensure that personnel and equipment are
properly grounded. Cover workerbenches with grounded conductive mats.
• Always turn the power supply off before inserting or removing the device from its socket.
• Protect leads with a conductive sheet when handling or transporting PC boards with devices.
5