N010-0554-T902 Datasheet, PDF (4/7 Pages) Fujitsu Component Limited. – STANDARD Resistive Touch Panel Specification

554 SERIES
n 5.6 FINGER LIFE









A finger is simulated by a silicon rubber plunger
R8 (Round type 8mm size) hardness 60˚C at 200g
at frequency 5Hz.
A failure is judged to happen when the current
consumption or insulation resistance or dielectric
strength are not met as shown in 5.3. The location
accuracy with 9 point calibration must be ±4.4 mm max.
Operating force is 150g max.
n 5.7 INFORMATION ON THE PANEL
Production year 99 00 etc.

9 0 1
The left side number shows production year, eg 1999

0 1 2
The left side number shows production year, eg 2000
[ . . . . . . . . . . .]
[ . . . . . . . . . . .]
The first dot after the space shows production month, eg May
The first dot after the space shows production month, eg June
n 6 PACKAGING
n 6.1 PACKING SPECIFICATION
Vibration:
10~55 Hz at 1 Octave per minute 10G 20 cycles with one side 0.75mm
Drop test:
60cm Drop 1 corner, 3 crease lines and 6 faces. 1 each 1 time
After the test no glass: flaw or crack is seen, and no dent or scratch on the film.

Also glass and film must not separate.
n 6.1 PACKING DETAILS
Each touch panel is placed into a plastic bag and is
held in place by a slit cut into the side of the card-
board. A second insertion piece is placed into the
carton to again add stability. The qty is written on
the side of the box. For example the N010-0554-
T001 has 80 pieces per box.
Insert
Touch panel with bag
Slit in cardboard
550 Type panel illustrated (554 type packed
a similar way)