MB84VA2002 Datasheet, PDF (10/29 Pages) Fujitsu Component Limited. – 8M (x 8/x 16) FLASH MEMORY & 2M (x 8) STATIC RAM

MB84VA2002-10/MB84VA2003-10
s ABSOLUTE MAXIMUM RATINGS
Storage Temperature .................................................................................................. –55°C to +125°C
Ambient Temperature with Power Applied .................................................................. –25°C to +85°C
Voltage with Respect to Ground All pins (Note) .......................................................... –0.3 V to VCCf +0.5 V
–0.3 V to VCCs +0.5 V
VCCf/VCCs Supply (Note) .............................................................................................. –0.3 V to +4.6 V
Note: Minimum DC voltage on input or I/O pins are –0.5 V. During voltage transitions, inputs may negativeovershoot
VSS to –2.0 V for periods of up to 20 ns. Maximum DC voltage on output and I/O pins are VCCf +0.5 V or VCCs
+0.5 V. During voltage transitions, outputs may positive overshoot to VCC +2.0 V for periods of up to 20 ns.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING RANGES
Commercial Devices
Ambient Temperature (TA) .........................................................................–20°C to +85°C
VCCf/VCCs Supply Voltages.........................................................................+2.7 V to +3.6 V
Operating ranges define those limits between which the functionality of the device is guaranteed.
WARNING: Recommended operating conditions are normal operating ranges for the semiconductor device. All
the device’s electrical characteristics are warranted when operated within these ranges.
Always use semiconductor devices within the recommended operating conditions. Operation outside
these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representative beforehand.
10