|
MB88146A Datasheet, PDF (1/20 Pages) Fujitsu Component Limited. – D/A Converter for Digital Tuning (12-channel, 8-bit, on-chip OP amp., low-voltage) | |||
|
FUJITSU SEMICONDUCTOR
DATA SHEET
DS04-13513-1E
Linear IC Converter
CMOS
D/A Converter for Digital Tuning
(12-channel, 8-bit, on-chip OP amp., low-voltage)
MB88146A
s DESCRIPTION
The MB88146A is an 8-bit D/A converter with twelve built-in channels. The 12 analog outputs each have a built-
in OP amplifier with large current drive-capability.
The data input/output format is CS (chip select) with serial bus connection available.
A built-in 12-bit I/O expander enables serial â parallel conversion (8 of the 12 bits can also be used for analog
output).
This product can be used for microcontroller port expansion, electronic level adjustment, replacement of semi-
fixed resistance for tuning, etc.
s FEATURES
⢠Ultra low power consumption (1.2 mW/chl: typical)
⢠Ultra compact package
⢠Built-in 12-channel R-2R type 8-bit D/A converter
⢠Built-in 12-bit I/O expander (8 bits also function as analog output)
⢠Built-in analog output amplifier (sink current 1.0 mA maximum, source current 1.0 mA maximum)
⢠Built-in power-on detection circuit (initialized at detection of VccD power-on)
⢠MCU interface compatible with 3 V to 5 V systems
⢠Power divided into MCU interface power supply (VccD) and OP amplifier power supply (VccA), D/A converter
power supply (VccD)
⢠Analog output capability from 0 V to VccA
⢠Serial data I/O operates to maximum of 2.5 MHz (in cascade connection, up to 2.5 MHz when VccD = 5 V, up
to 1.5 MHz when VccD = 3 V)
⢠CMOS process
⢠Choice of two packages: SDIP-24 pin and SSOP-24 pin.
s PACKAGES
24-pin Plastic DIP
24-pin Plastic SSOP
(DIP-24P-M02)
(FPT-24P-M03)
|
▷ |