MB85RS128A Datasheet, PDF (1/20 Pages) Fujitsu Component Limited. – Memory FRAM 128K (16 K x 8) Bit SPI

FUJITSU SEMICONDUCTOR
DATA SHEET
Memory FRAM
DS501-00008-0v01-E
128K (16 K × 8) Bit SPI
MB85RS128A
■ DESCRIPTION
MB85RS128A is a FRAM (Ferroelectric Random Access Memory) chip in a configuration of 16,384
words × 8 bits, using the ferroelectric process and silicon gate CMOS process technologies for forming the
nonvolatile memory cells.
MB85RS128A adopts the Serial Peripheral Interface (SPI).
The MB85RS128A is able to retain data without using a back-up battery, as is needed for SRAM.
The memory cells used in the MB85RS128A can be used for 10¹⁰ read/write operations, which is a significant
improvement over the number of read and write operations supported by Flash memory and E²PROM.
MB85RS128A does not take long time to write data unlike Flash memories nor E²PROM, and MB85RS128A
takes no wait time.
■ FEATURES
• Bit configuration
• Operating power supply voltage
• Operating frequency
• Serial Peripheral Interface
• Operating temperature range
• Data retention
• High endurance
• Package
: 16,384 words × 8 bits
: 3.0 V to 3.6 V
: 25 MHz (Max)
: SPI (Serial Peripheral Interface)
Correspondent to SPI mode 0 (0, 0) and mode 3 (1, 1)
: −40 °C to +85 °C
: 10 years (+55 °C)
: 10 Billion Read/writes
: 8-pin plastic SOP (FPT-8P-M02)
Copyright©2011 FUJITSU SEMICONDUCTOR LIMITED All rights reserved
2011.6