MB85RC64PNF-G Datasheet, PDF (1/20 Pages) Fujitsu Component Limited. – 64 K (8 K × 8) Bit I2C

FUJITSU SEMICONDUCTOR
DATA SHEET
Memory FRAM
64 K (8 K × 8) Bit I²C
MB85RC64
DS05–13109–3E
■ DESCRIPTION
The MB85RC64 is a FRAM (Ferroelectric Random Access Memory) Stand-Alone chip in a configuration of
8,192 words × 8 bits, using the ferroelectric process and silicon gate CMOS process technologies for forming
the nonvolatile memory cells.
The MB85RC64 adopts the two-wire serial interface.
Unlike SRAM, the MB85RC64 is able to retain data without using a data backup battery.
The read/write endurance of the nonvolatile memory cells used for the MB85RC64 has improved to be at
least 10¹⁰ cycles, significantly out performing Flash memory and E²PROM in the number.
The MB85RC64 does not need a polling sequence after writing to the memory such as the case of Flash
memory nor E²PROM.
■ FEATURES
• Bit configuration
: 8,192 words × 8 bits
• Operating power supply voltage : 2.7 V to 3.6 V
• Operating frequency
: 400 kHz (Max)
• Two-wire serial interface
: I²C-bus specification ver. 2.1 compliant, supports Standard-mode/
Fast-mode.
Fully controllable by two ports: serial clock (SCL) and serial data (SDA).
• Operating temperature range : − 40 °C to +85 °C
• Data retention
: 10 years ( + 75 °C)
• Read/write endurance
: 10¹⁰ times
• Package
: Plastic / SOP, 8-pin (FPT-8P-M02)
• Low power consumption
: Operating current 0.15 mA (Max: @400 kHz), Standby current 5 μA (Typ)
Copyright©2010-2011 FUJITSU SEMICONDUCTOR LIMITED All rights reserved
2011.6