|
MB84VA2004 Datasheet, PDF (1/29 Pages) Fujitsu Component Limited. – 8M (x 8) FLASH MEMORY & 1M (x 8) STATIC RAM | |||
|
FUJITSU SEMICONDUCTOR
DATA SHEET
DS05-50106-1E
MCP (Multi-Chip Package) FLASH MEMORY & SRAM
CMOS
8M (Ã 8) FLASH MEMORY &
1M (Ã 8) STATIC RAM
MB84VA2004-10/MB84VA2005-10
s FEATURES
⢠Power supply voltage of 2.7 to 3.6 V
⢠High performance
100 ns maximum access time
⢠Operating Temperature
â20 to +85°C
â FLASH MEMORY
⢠Minimum 100,000 write/erase cycles
⢠Sector erase architecture
One 16 K byte, two 8 K bytes, one 32 K byte, and fifteen 64 K bytes.
Any combination of sectors can be concurrently erased. Also supports full chip erase.
⢠Boot Code Sector Architecture
MB84VA2004: Top sector
MB84VA2005: Bottom sector
⢠Embedded EraseTM Algorithms
Automatically pre-programs and erases the chip or any sector
⢠Embedded ProgramTM Algorithms
Automatically writes and verifies data at specified address
⢠Data Polling and Toggle Bit feature for detection of program or erase cycle completion
⢠Ready-Busy output (RY/BY)
Hardware method for detection of program or erase cycle completion
⢠Automatic sleep mode
When addresses remain stable, automatically switch themselves to low power mode.
⢠Low VCC write inhibit ⤠2.5 V
⢠Erase Suspend/Resume
Suspends the erase operation to allow a read in another sector within the same device
⢠Please refer to "MBM29LV800TA/BA" data sheet in detailed function
â SRAM
⢠Power dissipation
Operating : 35 mA max.
Standby : 30 µA max.
⢠Power down features using CE1s and CE2s
⢠Data retention supply voltage: 2.0 V to 3.6 V
Embedded EraseTM and Embedded ProgramTM are trademarks of Advanced Micro Devices, Inc.
|
▷ |