MB3782_1 Datasheet, PDF (1/27 Pages) Fujitsu Component Limited. – ASSP Power Supplies BIPOLAR Switching Regulator Controller

FUJITSU SEMICONDUCTOR
DATA SHEET
DS04-27205-5E
ASSP Power Supplies
BIPOLAR
Switching Regulator Controller
MB3782
s DESCRIPTION
The FUJITSU MB3782 is a PWM-type switching regulator controller, designed with open-collector output for
connection to external drive transistors and coils, providing a selection of three types of output voltage: step-up,
step-down or inverting (inverting output is available on one circuit only).
The MB3782 features identical oscillator output waveforms to enable completely synchronous operation and
prevent the occurrence of low-frequency beat between channels.
Also, the MB3782 features low power dissipation (2.1 mA Typ) and a built-in standby mode (10 µA), making
possible the configuration of a wide variety of high-efficiency, stable power supplies, even with the use of battery
power. The MB3782 is an ideal power supply for high-performance portable devices such as video camcorders
and cameras.
s FEATURES
• Wide voltage range (3.6 V to 18 V)
• Low power dissipation (operating mode: 2.1 mA (Typ), standby mode: 10 µA (Max)
• Wide range of oscillator frequencies, high-frequency capability (1 to 500 kHz)
• On-chip timer-latch type short detection circuit
• On-chip undervoltage lockout circuit
• On-chip 2.50 V reference voltage circuit (1.25 V output available at RT pin)
• Dead time adjustment over full duty cycle range
• On-chip standby mode (power on/off function)
s PACKAGE
Plastic DIP, 20 pin
Plastic SOP, 20 pin
(DIP-20P-M01)
(FPT-20P-M01)