33879 Datasheet, PDF (8/24 Pages) Freescale Semiconductor, Inc – Configurable Octal Serial Switch with Open Load Detect Current Disable

ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 4. Static Electrical Characteristics (continued)
Characteristics noted under conditions 3.1 V ≤ V_DD ≤ 5.5 V, 5.5 V ≤ V_PWR ≤ 18 V, -40°C ≤ T_C ≤ 125°C unless otherwise noted.
Where applicable, typical values reflect the parameter’s approximate average value with V_PWR = 13 V, T_A = 25°C.
Characteristic
Symbol
Min
Typ
Max
Unit
POWER OUTPUT
Drain-to-Source ON Resistance (I_OUT = 0.350 A, V_PWR = 13 V)
T_J = 125°C
T_J = 25°C
T_J = -40°C
R_{DS (ON)}
–
Ω
–
1.4
–
0.75
–
–
–
–
Output Self Limiting Current High-Side and Low-Side Configurations
I_{OUT (LIM)}
0.6
–
1.2
A
Output Fault Detection Voltage Threshold ⁽⁷⁾
Outputs Programmed OFF
V_OUT(FLT-TH)
V
2.5
4.0
4.5
Output Fault Detection Current @ Threshold, High-Side Configuration I_OUT(FLT-TH)
µA
Outputs Programmed OFF
35
55
90
Output Fault Detection Current @ Threshold, Low-Side Configuration I_OUT(FLT-TH)
µA
Outputs Programmed OFF
20
30
60
Output OFF Open Load Detection Current, High-Side Configuration
V_DRAIN = 16 V, V_SOURCE = 0 V, Outputs Programmed OFF,
VPWR=16V
I_OCO
µA
65
100
160
Output OFF Open Load Detection Current, Low-Side Configuration
V_DRAIN = 16 V, V_SOURCE = 0 V, Outputs Programmed OFF,
VPWR=16V
I_OCO
µA
40
75
135
Output Clamp Voltage Low-Side Drive
I_D = 10 mA
V_{OC (LSD)}
V
40
45
55
Output Clamp Voltage High-Side Drive
I_S = -10 mA
Output Leakage Current High-Side and Low-Side Configurations
V_DD = 0 V, V_DRAIN = 16 V, V_SOURCE = 0 V
Output Leakage Current Low-Side Configuration
V_DD = 5.0 V, V_DRAIN = 16 V, V_SOURCE = 0 V,
Open Load Detection Current Disabled
V_{OC (HSD)}
V
-15
- 20
- 25
I_{OUT (LKG)}
–
µA
–
5.0
I_{OUT (LKG)}
µA
–
–
5.0
Output Leakage Current High-Side Configuration
V_DD = 5.0 V, V_DRAIN = 16 V, V_SOURCE = 0 V,
Open Load Detection Current Disabled
I_{OUT (LKG)}
–
µA
–
20
Overtemperature Shutdown ⁽⁸⁾
T_LIM
155
–
185
°C
Overtemperature Shutdown Hysteresis ⁽⁸⁾
T_{LIM (HYS)}
5.0
10
15
°C
Notes
7. Output fault detection thresholds with outputs programmed OFF. Output fault detect thresholds are the same for output open and shorts.
8. This parameter is guaranteed by design; however, it is not production tested.
33879
8
Analog Integrated Circuit Device Data
Freescale Semiconductor