MC33972 Datasheet, PDF (7/28 Pages) Motorola, Inc – Multiple Switch Detection Interface with Suppressed Wake-Up

ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 4. Static Electrical Characteristics (continued)
Characteristics noted under conditions 3.1 V ≤ V_DD ≤ 5.25 V, 8.0 V ≤ V_PWR ≤ 16 V, -40°C ≤ T_C ≤ 125°C, unless otherwise
noted. Where applicable, typical values reflect the parameter’s approximate average value with V_PWR = 13 V, T_A = 25°C.
Characteristic
Symbol
Min
Typ
Max
Unit
DIGITAL INTERFACE
Input Logic Voltage Thresholds ⁽¹⁰⁾
SCLK, SI, Tri-State SO Input Current
0 V to V_DD
V_INLOGIC
0.8
–
2.2
V
I_SCLK, I_SI,
µA
I_{SO (TRI)}
-10
–
10
CS Input Current
CS = V_DD
I_CS
µA
-10
–
10
CS Pullup Current
CS = 0 V
I_CS
µA
30
–
100
SO High-State Output Voltage
I_SO(HIGH) = -200 µA
V_{SO (HIGH)}
V
V_DD - 0.8
–
V_DD
SO Low-State Output Voltage
I_SO(HIGH) = 1.6 mA
Input Capacitance on SCLK, SI, Tri-State SO ⁽¹¹⁾
INT Internal Pullup Current
V_{SO (LOW)}
–
C_IN
–
–
15
V
–
0.4
–
20
pF
40
100
µA
INT Voltage
INT = Open Circuit
INT Voltage
I _INT = 1.0 mA
V _{INT (HIGH)}
V
V_DD - 0.5
–
V_DD
V _{INT (LOW)}
V
–
0.2
0.4
WAKE Internal Pullup Current
WAKE Voltage
WAKE = Open Circuit
I _{WAKE (PU)}
20
40
100
µA
V _{WAKE (HIGH)}
V
4.0
4.3
5.3
WAKE Voltage
I _WAKE = 1.0 mA
V _WAKE(LOW)
V
–
0.2
0.4
WAKE Voltage
Maximum Voltage Applied to WAKE Through External Pullup
V _WAKE(MAX)
–
V
–
40
Notes
10. Upper and lower logic threshold voltage levels apply to SI, CS, and SCLK.
11. This parameter is guaranteed by design but is not production tested.
Analog Integrated Circuit Device Data
Freescale Semiconductor
33972
7