56F8025_07 Datasheet, PDF (68/160 Pages) Freescale Semiconductor, Inc – 16-bit Digital Signal Controllers

5.6.7.4 ADC Zero Crossing Interrupt Priority Level (ADC_ZC IPL)—Bits 7–6
This field is used to set the interrupt priority level for the ADC Zero Crossing IRQ. This IRQ is limited to
priorities 0 through 2. It is disabled by default.
• 00 = IRQ disabled (default)
• 01 = IRQ is priority level 0
• 10 = IRQ is priority level 1
• 11 = IRQ is priority level 2
5.6.7.5 ADC B Conversion Complete Interrupt Priority Level
(ADCB_CC IPL)—Bits 5–4
This field is used to set the interrupt priority level for the ADC B Conversion Complete IRQ. This IRQ is
limited to priorities 0 through 2. It is disabled by default.
• 00 = IRQ disabled (default)
• 01 = IRQ is priority level 0
• 10 = IRQ is priority level 1
• 11 = IRQ is priority level 2
5.6.7.6 ADC A Conversion Complete Interrupt Priority Level
(ADCA_CC IPL)—Bits 3–2
This field is used to set the interrupt priority level for the ADC A Conversion Complete IRQ. This IRQ is
limited to priorities 0 through 2. It is disabled by default.
• 00 = IRQ disabled (default)
• 01 = IRQ is priority level 0
• 10 = IRQ is priority level 1
• 11 = IRQ is priority level 2
5.6.7.7 Programmable Interval Timer 2 Interrupt Priority Level
(PIT2 IPL)—Bits 1–0
This field is used to set the interrupt priority level for the Programmable Interval Timer 2 IRQ. This IRQ
is limited to priorities 0 through 2. It is disabled by default.
• 00 = IRQ disabled (default)
• 01 = IRQ is priority level 0
• 10 = IRQ is priority level 1
• 11 = IRQ is priority level 2
56F8025 Data Sheet, Rev. 3
68
Freescale Semiconductor
Preliminary