34652_07 Datasheet, PDF (6/26 Pages) Freescale Semiconductor, Inc – 2.0 A Negative Voltage Hot Swap Controller with Enhanced Programmability

ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 3. Static Electrical Characteristics
Characteristics noted under conditions 15 V ≤ V_PWR ≤ 80 V and -40°C ≤ T_A ≤ 85°C. All voltages are referenced to VIN unless
otherwise noted.
Characteristic
POWER SUPPLY PIN (VPWR)
Symbol
Min
Typ
Max
Unit
Supply Voltage
V_PWR
15
Supply Current, Device Enabled, Default Mode, Normal Operation ⁽¹¹⁾
I_IN
—
Undervoltage Lockout Threshold (UVLO)
Rising
Falling
Hysteresis
V_UVLOR
7.0
V_UVLOF
6.0
V_UVLOHY
—
—
80
V
900
1400
µA
V
8.0
9.0
7.0
8.0
1.0
—
UNDERVOLTAGE CONTROL
UV Threshold (Default)
Rising
Falling
Hysteresis
V_UV(ON)
—
V_UV(OFF)
—
V_UVHY
—
UV Comparator Threshold
Rising
Hysteresis
V_UVC
—
V_UVCHY
—
UV Input Leakage Current
I_UVLG
—
Maximum Value of the Series Resistance Between UV and VPWR Pins
—
—
V
38
—
37
—
1.0
—
1.3
—
V
34
—
mV
—
1.0
µA
—
500
kΩ
OVERVOLTAGE CONTROL
OV Threshold (Default)
Rising
Falling
Hysteresis
V_{OV (OFF)}
—
V_{OV (ON)}
—
V_OVHY
—
OV Comparator Threshold
Rising
Hysteresis
V_OVC
—
V_OVCHY
—
OV Input Leakage Current
I_OVLG
—
Maximum Value of the Series Resistance Between UV and VPWR Pins
—
—
Notes
11. The supply current depends on operation mode and can be calculated as follows:
•Start-Up Mode: I_IN = 539 µA + 548 µ * I_CHG(A) + 216 µ * I_LIM(A) + V_PWR(V) / 460(kΩ)
•Normal Mode: I_IN = 539 µA + 240 µ * I_LIM(A) + 288 µ * I_LOAD(A) + V_PWR(V) / 460(kΩ)
•Overcurrent Mode: I_IN = 539 µA + 612 µ * I_LIM(A) + V_PWR(V) / 460(kΩ)
•Disable Mode: I_IN = 539 µA + 240 µ * I_LIM(A) + I_DIS(µA) + V_PWR(V) / 460(kΩ)
V
78
—
76
—
2.0
—
1.3
—
V
34
—
mV
—
1.0
µA
—
500
kΩ
34652
6
Analog Integrated Circuit Device Data
Freescale Semiconductor